IBM SG24-4817-00 manual Description

This soft copy for use by IBM employees only.

port is disabled.″

::= { interfaceEntry 16}

interfaceFrameFormat OBJECT-TYPE SYNTAX INTEGER {

none (1), sonet-sts-3c (2), sdh-stm-1 (3), ds3 (4),

e3 (5)

}

ACCESS read-write STATUS mandatory

DESCRIPTION

″The format of the frames exchanged on this port. For a 155 Mbits LAN port, 2 formats are supported: sonet-sts-3c and sdh-stm-1. It can only be modified if the port atm access is UNI or NNI. The frame format of a wan port cannot be modified. For the other ports, the frame format cannot be modified and is always returned as none.

The frame format can be changed only when the port

is disabled.″

::= { interfaceEntry 17}

-- switch statistics

globalThroughputStats OBJECT IDENTIFIER ::= { physical 5 }

globalThroughputMonitoring OBJECT-TYPE SYNTAX INTEGER {

on (1), off (2)

}

ACCESS read-write STATUS mandatory

DESCRIPTION

″When on, the switch throughput is monitored. When off, the switch thoughput is not monitored.

Note that the monitoring decreases the system overall performances.″

::= { globalThroughputStats 1 }

globalThroughputAggregateOutCells OBJECT-TYPE SYNTAX Counter

ACCESS read-only STATUS mandatory

DESCRIPTION

″The total number of cells transmitted from the switch.

Note that this value is the aggregate throughput of all the ports on several minutes.″

::= { globalThroughputStats 2 }

receiveTopList OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory

DESCRIPTION

214ATM Workgroup Solutions: Implementing the 8285 ATM Switch