IBM SG24-4817-00 manual Description

This soft copy for use by IBM employees only.

″The ifindex value used at the remote end to identify the interface where the PVC ends.

This entry will remain in the notReady state until this attribute is set (and the atmPvcRowStatus is set to active).″

::= { atmPvcEpEntry 7 }

atmPvcEpRemVpi OBJECT-TYPE SYNTAX INTEGER (0..65536) ACCESS read-write STATUS mandatory

DESCRIPTION

″The VPI value assigned to this PVC at the destination

(remote end).

If left at 65536 (default value), one value is automatically allocated by the agent.″

DEFVAL { 65536 }

::= { atmPvcEpEntry 8 }

atmPvcEpRemVci OBJECT-TYPE SYNTAX INTEGER (0..65536) ACCESS read-write STATUS mandatory

DESCRIPTION

″The VCI value assigned to this PVC at the destination. For VP-type PVC, this value is not applicable and is set to 0.

If left at 65536 (default value), one value is

automatically allocated by the agent (for VC only).″ DEFVAL { 65536 }

::= { atmPvcEpEntry 9 }

atmPvcEpLastActive OBJECT-TYPE SYNTAX DateAndTime ACCESS read-only STATUS mandatory

DESCRIPTION

″The date and time of the latest PVC activation.″ ::= { atmPvcEpEntry 10}

atmPvcEpQ2931Cause OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory

DESCRIPTION

″The cause of the failure as defined by Q2931.″ ::= { atmPvcEpEntry 11}

atmPvcEpFailures OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory

DESCRIPTION

″The number of times this PVC failed.″ ::= { atmPvcEpEntry 12 }

--The group atmLanEmulation defines the specific support for

--the lan emulation resources in the atm node

252ATM Workgroup Solutions: Implementing the 8285 ATM Switch