IBM SG24-4817-00 manual Description, Syntax Integer

This soft copy for use by IBM employees only.

STATUS mandatory

DESCRIPTION

″The local date and time in the ATM agent.″ ::= { base 1 }

lastChange OBJECT-TYPE SYNTAX DateAndTime ACCESS read-only STATUS deprecated

DESCRIPTION

″The date and time of the last major change detected:

-date and time reset

-agent IP address(es), subnet mask(s), default gateway changed

-LAN Emulation or IP ARP server address(es) changed

-system parameters (name, contact, location) changed

-module Changed

--module added/removed

--administrative State changed (isolate/attached)

-interface changed:

--administrative State changed (enabled/disabled)

--operational state changed

This variable is updated in relation with the following traps:

-hello trap

-change trap

-linkUp/linkDown traps.″ ::= { base 2 }

lock OBJECT-TYPE

SYNTAX INTEGER {

secured (1), unlock (2), disabled (3)

}

ACCESS read-write STATUS mandatory

DESCRIPTION

″The purpose of this variable is to protect the path between the hub and the network management station.

When set to secure (1), it is not possible to:

-disable a port:

--if the SNMP request was received on this port

--if a LAN Emulation or an IP ARP server is on this port

-isolate a module:

--if the SNMP request was received on this port

--if a LAN Emulation or an IP ARP server is on this port

When set to unlock (2), the parameters referenced above can be modified for a limited time (30 seconds).

When set to disabled (3), no protection is provided.

Trying to modify one of these parameters results in a genErr error code in the Get-Response and a trap is returned to the agent.″

::= { base 3 }

ipArpServerAtmAddress OBJECT-TYPE

198ATM Workgroup Solutions: Implementing the 8285 ATM Switch