IBM SG24-4817-00 manual ″ Whether data scrambling is used when transmitting on this

This soft copy for use by IBM employees only.

interfaceMediaSpeed OBJECT-TYPE

SYNTAX INTEGER ACCESS read-only STATUS mandatory

DESCRIPTION

″The speed of this interface, in bits per second.″ ::= { interfaceEntry 9 }

interfaceMediaErrors OBJECT-TYPE SYNTAX Counter

ACCESS read-only STATUS mandatory

DESCRIPTION

″The number of physical layer errors detected on this media such as violation errors and length errors.″

::= { interfaceEntry 10}

interfaceSubSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory

DESCRIPTION

″When equal to 0, this interface (and its physical connector) is directly located on the module identified by the slot number.

When equal to a non-zero value, this number identifies a feature card of the module that is used by this interface.″

::= { interfaceEntry 11}

interfaceClocking OBJECT-TYPE SYNTAX INTEGER {

internal (1), external (2)

}

ACCESS read-write STATUS mandatory

DESCRIPTION

″The source of the bit clock used for data transmission. When set to external, the source is the clock received from the line.

The clocking can be modified only when the port is disabled.

The clocking can only be modified on 155 Mbits ports for which the atm access is UNI or NNI.″

::= { interfaceEntry 12}

interfaceScrambling OBJECT-TYPE SYNTAX INTEGER {

off (1), cell (2), frame (3),

cell-and-frame (4), cell-in-receive-only (5), cell-in-transmit-only (6)

}

ACCESS read-write STATUS mandatory

DESCRIPTION

″Whether data scrambling is used when transmitting on this

212ATM Workgroup Solutions: Implementing the 8285 ATM Switch