This soft copy for use by IBM employees only.
Attention
The BOOT and OPERATIONAL code load very quickly (approximately 1 minute each). However, because of extensive
4.Download the new microcode for any media modules installed in the 8285 Expansion Chassis by issuing the appropriate SET TFTP SERVER_IP_ADDRESSS, SET TFTP FILE_TYPE, SET TFTP FILE_NAME, SET TFTP TARGET_MODULE, and DOWNLOAD INBAND commands. In this case the TARGET_MODULE number will be slot number that each card is installed
in. Be sure to check the current FPGA code first, using the SHOW MODULE n VERBOSE (where n is the blade′s slot number).
