IBM SG24-4817-00 manual AtmSvcSiVpi

This soft copy for use by IBM employees only.

atmQ2931InCallInProgress OBJECT-TYPE SYNTAX Gauge

ACCESS read-only STATUS mandatory

DESCRIPTION

″This is the current number of incoming calls in progress on this interface.″

::= { atmQ2931StatsEntry 8 }

atmQ2931InCallFailures OBJECT-TYPE SYNTAX Counter

ACCESS read-only STATUS mandatory

DESCRIPTION

″This is the number of calls that were rejected by the

receiver.″

::= { atmQ2931StatsEntry 9 }

--This table contains basic information about calls in progress.

--It allows the network operater to force clear an SVC.

--Its implementation is optional.

atmSvcTable OBJECT-TYPE

SYNTAX SEQUENCE OF AtmSvcEntry ACCESS not-accessible

STATUS mandatory

DESCRIPTION

″This table contains basic information for each active Switched Virtual Connection (SVC).″

::= { atmQ2931 3 }

atmSvcEntry OBJECT-TYPE SYNTAX AtmSvcEntry ACCESS not-accessible STATUS mandatory

DESCRIPTION

″Entries of atmSvcTable. Each entry uniquely

defines two end-points of an SVC. In the case of a multicast SVC, each entry is defined by the association of the root and one party.″

INDEX { atmSvcInterfaceIndex, atmSvcSiVpi, atmSvcSiVci, atmSvcCallReference, atmSvcEndPointReference }

::= { atmSvcTable 1 }

AtmSvcEntry ::= SEQUENCE { atmSvcInterfaceIndex

INTEGER,

atmSvcSiVpi

INTEGER,

atmSvcSiVci

INTEGER,

atmSvcCallReference

INTEGER, atmSvcEndPointReference

INTEGER,

Appendix E. IBM ATM Campus Switch Private MIBs 233