IBM SG24-4817-00 manual Description

This soft copy for use by IBM employees only.

DESCRIPTION

″The name of the file to transfer.″ ::= { tftp 4 }

fileType OBJECT-TYPE SYNTAX INTEGER {

unknown (1), bootCode (2), operationalCode (3), errorLog (4), systemTrace (5), trsTrace (6),

--(7) intentionnally left unused trsDump (8), configuration (9)

}

ACCESS read-write STATUS mandatory

DESCRIPTION

″The type of file to transfer.

Boot and operational codes can only be dowlnoaded. Logs, traces and dumps can only be uploaded. ″

::= { tftp 5 }

fileTarget OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory

DESCRIPTION

″The module target to which the transfer applies.

When set to 0, the transfer applies to the agent itself.″

::= { tftp 6 }

transferResult OBJECT-TYPE

SYNTAX INTEGER { not-initialized (1), transfer-successful (2), upload-in-progress (3), download-in-progress (4), generic-error (5), no-response-from-host (6), connection-lost (7), file-not-found (8), file-empty (9), file-too-big (10), access-rights-violation (11), invalid-file-header (12), checksum-error (13), transfer-error (14), hardware-error (15), file-already-exists(16), config-unreadable-version(17), config-file-empty(18), config-impossible(19), config-internal-error(20), config-applied-ok(21)

}

ACCESS read-only STATUS mandatory

DESCRIPTION

224ATM Workgroup Solutions: Implementing the 8285 ATM Switch