This soft copy for use by IBM employees only.

line. Scrambling may be applied at the cell level, at the frame level or at cell and frame level. The scrambling configuration can only be modified for a wan interface.

cell-in-receive-only applies only for a wan interface. In this case, the cells are descrambled when received, and are not scrambled when transmitted. cell-in-transmit-only can only be set for a wan interface. In this case, the cells are not descrambled when received, and are scrambled when transmitted.″

::= { interfaceEntry 13}

interfaceAvailableBandwidth OBJECT-TYPE SYNTAX INTEGER

ACCESS read-only STATUS mandatory

DESCRIPTION

For a UNI or a NNI port: the current bandwidth available for the reserved bandwidth connections on this port.

For a SSI port: the current bandwidth available on this port.

It is in bits per second.″ ::= { interfaceEntry 14}

interfaceAllocatedBandwidth OBJECT-TYPE SYNTAX INTEGER

ACCESS read-only STATUS mandatory

DESCRIPTION

For a UNI or a NNI port: the bandwidth, in bits per second, currently used by the reserved bandwidth connections

on this port.

For a SSI port: the bandwidth, in bits per second, currently reserved on this port.″

::= { interfaceEntry 15}

interfaceMaxBandwidth OBJECT-TYPE SYNTAX INTEGER

ACCESS read-write STATUS mandatory

DESCRIPTION

For a SSI port: the maximum bandwidth usable on this port.

Out of this defined bandwidth: at most 85% are usable for the reserved bandwidth connections and at least 15% are usable for the non reserved bandwidth connections.

The interfaceMaxBandwidth must not exceed the physical bandwidth of this port: interfaceMediaSpeed. The minimum valid value to set for the interfaceMaxBandwidth is 60000 bps, which is the bandwidth requested to set a non-reserved bandwidth connection on this ssi link.

The interfaceMaxBandwidth must be equal on each side of an SSI link to avoid route computation deadlocks. The default value is equal to interfaceMediaSpeed.

For a port which is not a SSI port, the maximum bandwidth cannot be changed and remains equal to interfaceMediaSpeed.

The interfaceMaxBandwidth is given in bits per second. The interfaceMaxBandwidth can be modified only when the

Appendix E. IBM ATM Campus Switch Private MIBs 213

Page 229
Image 229
IBM SG24-4817-00 manual Description