This soft copy for use by IBM employees only.

-- Dumps

dumps OBJECT IDENTIFIER ::= { service 2 }

-- dumps.1 intentionnally left unused

trsDump OBJECT-TYPE

SYNTAX INTEGER { ready (1), start (2)

}

ACCESS read-write STATUS mandatory

DESCRIPTION

When start is selected, a dump of the Topology and Route Services component is taken.

The dump is stored in the hub in a file that can be retrieved through TFTP.″

::= { dumps 2 }

-- Microcode swap

swap OBJECT IDENTIFIER ::= { service 3 }

swapControl OBJECT-TYPE

SYNTAX INTEGER { ready (1), swap (2)

}

ACCESS read-write STATUS mandatory

DESCRIPTION

When swap is selected, the backup microcode image is checked and, if valid, activated.

The previously active microcode image becomes the backup image.

The atm subsystem is reset.″ ::= { swap 1 }

swapResult OBJECT-TYPE

SYNTAX INTEGER { not-initialized (1), swap-successful (2), swap-in-progress (3), checksum-error (4) }

ACCESS read-only STATUS mandatory

DESCRIPTION

The result of the latest microcode swap.

When an operational code image is downloaded or

when the system is reset, swapControl becomes not-initialized.″

::= { swap 2 }

swapBackupVersion OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory

DESCRIPTION

226ATM Workgroup Solutions: Implementing the 8285 ATM Switch

Page 242
Image 242
IBM SG24-4817-00 manual Description