This soft copy for use by IBM employees only.

￿

 

 

￿

8285 Nways ATM Workgroup Switch

 

(C)Copyright IBM Corp. 1996. All rights reserved. Password:

Welcome to system administrator service on 8285. 8285> set device atm_address

Enter ATM address : 39.99.99.99.99.99.99.00.00.99.99.01.09.99.99.99.99.99 This call will reset the ATM subsystem.

Are you sure ? (Y/N) Y

Press Enter ￿1￿

8285 Nways ATM Workgroup Switch

(C)Copyright IBM Corp. 1996. All rights reserved. Password:

Welcome to system administrator service on 8285. 8285> set device lan_emulation_client

Enter lan type: eth ip_address:9.100.86.200 subnet_mask:ff.ff.ff.c0 Some parameters are missing. Client state unchanged. ￿2￿

8285> set device lan_emulation_client Enter lan type: eth no_lecs_with_les:

Enter address : 39.99.99.99.99.99.99.00.00.99.99.01.09.99.99.99.99.99.01.02 Some parameters are missing. Client state unchanged.

8285> set device lan_emulation_client

Enter lan type: eth mac_address:0200CCCCCCCC Client starting. ￿3￿

8285> set device lan_emulation_client eth eth_type:DIX ￿4￿ Client starting.

8285> set lan_emul server 1 start eth 64 Enter emulated LAN name:

 

Starting server. ￿5￿

 

 

8285>

set port 1.1

enable uni

 

1.01:Port set

 

 

 

8285>

set port 1.8

enable uni

 

1.08:Port set ￿6￿

 

 

 

8285>

ping 9.100.86.192

 

Starting ping (hit

CTRL-C to stop) ...

 

Ping 9.100.86.192:

1

packets sent, 1 received

 

Ping 9.100.86.192:

2

packets sent, 2 received

￿

8285>

 

 

 

￿

Figure 44. The Console Screen of a Simple LANE Network Configuration

Notes:

￿1￿ With control point V1.3 or later, the 8285 switch uses this message to tell you when the ATM subsystem reset is finished.

￿2￿ The LEC in the IBM 8285 doesnt start until you define the necessary parameters and this message appears. But the parameters you define are reflected.

￿3￿ The LEC in the IBM 8285 starts as soon as it gets the necessary parameters.

￿4￿ You may change the Ethernet type of the LEC in the IBM 8285 because the default is 802.3 and many devices use DIX as the default.

138ATM Workgroup Solutions: Implementing the 8285 ATM Switch

Page 154
Image 154
IBM SG24-4817-00 manual Console Screen of a Simple Lane Network Configuration