IBM SG24-4817-00 manual ″ Entries of atmPvcTable

This soft copy for use by IBM employees only.

DESCRIPTION

″Error condition W as defined in the Q.2110 Specification.

This is the number of times that transmission was not permitted by the peer entity due to

a lack of credit.″

::= { atmSaalStatsEntry 10 }

atmSaalCreditObtained OBJECT-TYPE SYNTAX Counter

ACCESS read-only STATUS mandatory

DESCRIPTION

″Error condition X as defined in the Q.2110 Specification.

This is the number of times that credit was obtained from the peer entity to allow

transmission.″

::= { atmSaalStatsEntry 11 }

--This MIB defines ATM support for Permanent Virtual Circuits. atmPvc OBJECT IDENTIFIER ::= { node 10 }

--Global PVC Parameter

atmPvcHandler OBJECT-TYPE SYNTAX INTEGER {

ready (1), out-of-memory (2)

}

ACCESS read-only STATUS mandatory

DESCRIPTION

″The status of the PVC handler in the switch.

When no more memory is available, the creation of new PVCs

is rejected with a generic Error sense code.″ ::= { atmPvc 1 }

-- PVC Table

atmPvcTable OBJECT-TYPE

SYNTAX SEQUENCE OF AtmPvcEntry ACCESS not-accessible

STATUS mandatory

DESCRIPTION

″This table lists all PVCs defined per interface.

There is only one entry in this table per PVC (point-to-point or point-to-multipoint PVC).″

::= { atmPvc 2 }

atmPvcEntry OBJECT-TYPE SYNTAX AtmPvcEntry ACCESS not-accessible STATUS mandatory

DESCRIPTION

″Entries of atmPvcTable.

Appendix E. IBM ATM Campus Switch Private MIBs 245