This soft copy for use by IBM employees only.

STATUS mandatory

DESCRIPTION

″The VCI value for this connection.″ ::= { vcXConnectEntry 3 }

vcXOutIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory

DESCRIPTION

″The interface number for this ATM port.″ ::= { vcXConnectEntry 4 }

vcXOutVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory

DESCRIPTION

″The VPI value for this connection.″ ::= { vcXConnectEntry 5 }

vcXOutVci OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory

DESCRIPTION

″The VCI value for this connection.″ ::= { vcXConnectEntry 6 }

vcXType OBJECT-TYPE

SYNTAX INTEGER { unicast (1), multicast (2)

}

ACCESS read-only STATUS mandatory

DESCRIPTION

Whether this cross-connection is part of a unicast or a

multicast connection.″

::= { vcXConnectEntry 7 }

vcXDirection OBJECT-TYPE

SYNTAX INTEGER { upstream (1), downstream (2)

}

ACCESS read-only STATUS mandatory

DESCRIPTION

Whether this entry identifies this cross-connection in the upstream or downstream flow, as seen from the root.

Downstream means that the connection was set up from the in parameters (interface, VPI, VCI) to the out parameters (interface, VPI, VCI).

In particular, for a multicast SVC, this means that the call initiator (the root in this case) is on the interface side labeled vcXInIndex.

Upstream means that the connection was set up from the

218ATM Workgroup Solutions: Implementing the 8285 ATM Switch

Page 234
Image 234
IBM SG24-4817-00 manual Description