This soft copy for use by IBM employees only.
STATUS mandatory
DESCRIPTION
″MaxCC as defined in the Q.2110 Specification. This is the maximum value for the state variable VT(CC), corresponding to the maximum number of
transmissions of a BGN, END, ER or RS PDU.″ ::= { atmSaalConfEntry 10 }
atmSaalMaxPD
DESCRIPTION
″MaxPD as defined in the Q.2110 Specification. This is the maximum iacceptable value for the state variable VT(PD) before sending a POLL PDU and resetting VT(PD) to zero.
This parameter is an upper limit for counter VT(PD) that sends a POLL PDU after every (MaxPD) SD PDUs.″
::= { atmSaalConfEntry 11}
atmSaalMaxStat
DESCRIPTION
″MaxSTAT as defined in the Q.2110 Specification.
This is the maximum number of list elements placed in a STAT PDU.″
::= { atmSaalConfEntry 12}
atmSaalStatsTable
SYNTAX SEQUENCE OF AtmSaalStatsEntry ACCESS
STATUS mandatory
DESCRIPTION
″This table contains statistics for the SAAL protocol, for outgoing calls only.″
::= { atmSaal 2 }
atmSaalStatsEntry
DESCRIPTION
″Entries of atmSaalConfTable. Each entry corresponds to a pair
of ATM interface, signalling channel.
A signalling channel is uniquely defined on each interface by the VPI and VCI values allocated to it.″
INDEX { atmSaalStatsIndex, atmSaalStatsSiVpi, atmSaalStatsSiVci } ::= { atmSaalStatsTable 1 }
AtmSaalStatsEntry ::= SEQUENCE { atmSaalStatsIndex