This soft copy for use by IBM employees only.
•
•
•
8285 LEC parameters
8285 Integrated LES parameters ATM module and port parameters
The parameters we use in our example are listed in Table 36.
Table 36. Necessary Parameters for 8285#1
Parameter | Value | Comments |
|
|
|
ATM Address |
|
|
|
|
|
ATM Prefix | 3999999999999900009999 | First 11 bytes of address |
|
|
|
ACN | 01 | 12th byte, should not be 0 |
|
|
|
HN | 09 | 13th byte, should not be 0 |
|
|
|
ESI | 999999999901 | |
|
|
|
SEL | 00 | 20th byte |
|
|
|
8285 Integrated LES parameters |
| |
|
|
|
Server ID | 1 |
|
|
|
|
ELAN type | Ethernet |
|
|
|
|
Max # of | 64 |
|
clients |
|
|
|
|
|
Max SDU size | 1516 | Default |
|
|
|
ELAN name | IBM_ETHERNET_LAN1 | Default |
|
|
|
8285 LEC parameters |
| |
|
|
|
ELAN type | Ethernet |
|
|
|
|
Ethernet type | DIX |
|
|
|
|
IP address | 9.100.86.200 |
|
|
|
|
Subnet Mask | FF.FF.FF.C0 |
|
|
|
|
Default | 0.0.0.0 | Not specified because not used |
Gateway |
| in this configuration |
|
|
|
MAC address | 0200CCCCCCCC | Canonical format |
|
|
|
Associated | 39999999999999000099 | Use |
LES or LECS | 99010999999999990102 | address (NO_LECS_WITH_LES) |
ATM address |
|
|
|
|
|
The commands we need are:
•
•
•
•
SET DEVICE ATM_ADDRESS
SET LAN_EMUL SERVER
SET DEVICE LAN_EMULATION_CLIENT
SET PORT
The SET DEVICE ATM_ADDRESS command causes the ATM subsystem to reset, so you have to save the configuration using SAVE ALL command if there are unsaved parameters.
Figure 44 on page 138 is an annotated transcript of the commands used to configure and test our simple LANE network.
Chapter 7. IBM 8285 Configuration 137
