IBM SG24-4817-00 manual OcPowerOutputWattageAvailable Gauge

This soft copy for use by IBM employees only.

ocPowerOutputWattageAvailable Gauge,

ocPowerOutputUnmanagedWattageAlloc Gauge

	}
ocPowerOutputType OBJECT-TYPE
SYNTAX INTEGER {
	plusFiveVolt(1),	-- + 5 Volt
	minusFiveVolt(2),	-- - 5	Volt
	plusTwelveVolt(3),	-- +12	Volt
	minusTwelveVolt(4),	-- -12	Volt
	plusTwoVolt(5)	-- + 2	Volt
	}
ACCESS	read-only
STATUS	mandatory
DESCRIPTION

″Identifies the power (voltage) line type for which this entry contains power budget information.″

::= { ocPowerOutputEntry 1 }

ocPowerOutputVoltageLevel OBJECT-TYPE SYNTAX Gauge

ACCESS read-only STATUS mandatory

DESCRIPTION

″In millivolts (1/1000 Volt), the actual voltage level

for this voltage type as sensed on the backplane. This voltage is supplied by all operational power supplies.″

::= { ocPowerOutputEntry 2 }

ocPowerOutputWattageCapacity OBJECT-TYPE SYNTAX Gauge

ACCESS read-only STATUS mandatory

DESCRIPTION

″In hundredths of a Watt (1/100 Watt), the maximum

wattage for the voltage line that is output by all operational power supplies combined.″

::= { ocPowerOutputEntry 3 }

ocPowerOutputWattageConsumed OBJECT-TYPE SYNTAX Gauge

ACCESS read-only STATUS mandatory

DESCRIPTION

″In hundredths of a Watt (1/100 Watt), the wattage

consumed by all hub modules. For a given voltage line, this object′ s value is the sum total of the power consumed by the hub itself, the Controller Modules

and all power-enabled slots containing IBM 8260 modules.

If power fault-tolerant mode is enabled (when it was previously disabled), this object′ s value is increased by the amount of power reserved for the voltage line.

If power fault-tolerant mode is disabled (when it was previously enabled), this object′ s value is decreased

by the amount of power that is returned to the available power budget for the voltage line.″

::= { ocPowerOutputEntry 4 }

Appendix E. IBM ATM Campus Switch Private MIBs 267