POD Farm 1.01 – POD Farm How To....
How To...
Basic Operation | 7•2 |
How to Insert POD Farm | 7•2 |
How to switch Views (Gear, Panel, Presets) | 7•3 |
How to add models to a Tone | 7•3 |
How to edit Amp or Effects settings | 7•4 |
How to turn POD Farm’s software knobs | 7•4 |
How to | 7•4 |
How to use the Tuner | 7•5 |
Load and Save Tones | 7•6 |
How to load a Tone Preset | 7•6 |
How to create a New (empty) Tone | 7•7 |
How to Save a Tone | 7•7 |
How to switch to Dual Tone mode | 7•8 |
How to switch to Single Tone mode | 7•9 |
Hardware Setup | 7•9 |
How to select hardware for POD Farm to use | 7•9 |
How to select your Preferred Audio Device | 7•10 |
How to connect your Hardware to a guitar amp | 7•11 |
Stay Up To Date | 7•11 |
How to check & update POD Farm, Line 6 hardware drivers and firmware | 7•11 |
How to purchase POD Farm | 7•12 |
How to find out what Amp & Effects Models are included with your Line 6 device.. | 7•12 |
How to purchase Model Packs | 7•12 |
How to use your Model Packs with POD Farm | 7•13 |
How to find FAQs | 7•13 |
7•1
