Line 6 UX1, TonePort UX8, TonePort DI, GX, TonePort KB37, UX2 manual Rear Panel Connections, 219

POD Farm 1.01 – UsingYour Line 6 Hardware

Mic Input Low Cut Filter and Pad Switches – Engage the Low Cut Filter for the Mic Input to cut off all frequencies 75Hz and below - useful for eliminating rumble from mic sources. If you are plugging in a Mic with a hot signal level, engage this pad to attenuate the channel strip’s Mic Input by -20dB.

Phantom Power Switch – Pushing in this button activates 48V Phantom Power for both Channel Strip Mic Inputs. An LED will light when Phantom Power is activated.

Phones Output

Phones Output - If you want to listen to the audio using stereo headphones, then plug them into this 1/4-inch stereo jack. This Phones jack outputs the same signal fed to the Analog Line Outs; the audio from your DAW, as well as anything plugged into the Guitar, Mic, Aux, Variax, digital or Line inputs. The volume is set by the Master Volume knob. Any time you use headphones, it important to be sure the Master Volume knob is not set at a ridiculous level first!

Rear Panel Connections

Look around back of your X3 Pro for more ins & outs...
AES/EBU In & Out - Connect	S/PDIF In & Out - Connect
digitally to other AES/EBU devices	digitally to other S/PDIF devices

FBV Pedal In - Connect a Line 6 FBV controller

MIDI In & Out/Thru -	Variax In - Connect	USB 2.0 - Connect
Connect to external MIDI	your Variax Guitar	to your computer
hardware

2•19