Line 6 UX2, TonePort UX8, GX Main Output Level Controls, Headphone Output Controls, Power Button

POD Farm 1.01 – UsingYour Line 6 Hardware

Main Output Level Controls

Main Outputs 1-2 are controlled by a main volume knob and main mute button. The volume knob is an analog level control and does not affect any level being sent to your computer. When Mute is engaged, as solid amber LED illuminates, blinking about once every 2 seconds.

Note that these controls operate on main outputs 1-2 only (headphone and S/PDIF levels are not affected). Outputs 3 – 8 are software controlled, via the Line 6 Audio-MIDI Devices application.

Headphone Output Controls

Headphone outputs 1-2 and 3-4 provide duplicate stereo outputs or Main Outs 1-2 and 3-4 respectively, providing discrete control over output levels sent over the headphone jacks. Note that headphone output levels are controlled independently of the Main volume control.

Power Button

When the power button is engaged, UX8’s main LEDs will illuminate. UX8 is not USB powered and receives no power from the computer.

LED status indicators

The Main Mute and Main Clip LEDs provide secondary functions in their ability to indicate the connection status of USB and S/PDIF, as follows:

•No USB connection - The main clip LEDs alternate steadily between left and right, about once every second. The USB cable may be unplugged or the UX8 Line 6 audio driver may not be installed on your computer.

The Line 6 audio driver is installed with the POD Farm applications installer - or you can launch Line 6 Monkey and go to the Updates tab to check for and install the latest driver version.

•No S/PDIF clock sync - The Mute LED blinks 3 times rapidly about once every second when the clock mode set to S/PDIF, and no external clock is present.

2•9