Line 6 UX2, TonePort UX8, TonePort DI, GX, UX1, TonePort KB37 POD Farm 1.01 Driver Panel & Recording

POD Farm 1.01 – Driver Panel & Recording

Note that the type of signal that is fed to each Send is configured on the POD X3’s on-board Outputs - Studio/Direct Mix settings screen. To put it another way, Send 1-2 is fed the same “Studio/Direct Mix” as your main outputs, which could be just a Tone 1, or some combination of Tone 1 & 2, depending on how you set the Studio/Direct mix controls. Please refer to your POD X3 Pilot’s Handbook for details on the Output screen options and especially about POD X3’s unique Dual Tone operation.

POD X3 also offers a Monitor Level slider in this tab as well - you can use this to independently adjust your POD X3 hardware monitor signal while recording (independently of the Send signal level that is being recorded).

PODxt devices show one Record Send (Record 1-2).

The type of signal that is routed to the Record Send 1-2 is determined by the PODxt Signal Routing option within the Audio Signal Routing menu at the left, (see the PODxt Audio Signal Routing section for more about the options in this menu). PODxt also offers a Monitor Level slider in this tab as well - you can use this to independently adjust your PODxt monitor signal while recording (independently of the Send signal level that is being recorded).

3•7