![](/images/new-backgrounds/1119069/119069173x1.webp)
Line 6 POD Farm 1.01 - POD Farm
Model Bypass & Delete Controls - Hovering over or selecting a model within the SFV illuminates the model, and a set of controls is displayed. Use these controls to bypass the model, or to remove it completely from the Tone path.
Bypass Button | Delete Button |
Model Name
Moving Effects Models
Many POD Farm Effects models offer the ability to be placed either “Pre” or “Post” within the signal chain (before or after the Amp model within the Tone path), which can offer slightly different sonic results, depending on the effect and amp settings in use. To move an effect, simply click and drag it left or right and you’ll see white arrows pointing downward, indicating the Pre and Post positions into which the effect can be dropped. Note that when in Dual Tone mode, you can also drag any model between Tones to copy the selected model into the other Tone path! For example, in the screen below, the Tone 1 Analog Chorus modulation effect is being dragged from its original Tone 1 “Post” position to the Tone 2 “Pre” position - this will copy the Analog Chorus, along with its current parameter settings, into the Tone 2 signal path.
Dragging an effect to copy it from Tone 1 to Tone 2