![](/images/new-backgrounds/1119069/11906997x1.webp)
POD Farm 1.01 – Driver Panel & Recording
2 – Selected Device icon: An icon for the selected Line 6 Device appears here.
3 – Driver version: Displays the current device’s installed driver version number.
4 – ESN: Displays the current device’s unique Electronic Serial Number.
5 – ASIO Client indicator: If you are running audio software that is using this Line 6 device as its ASIO sound card, the name of the software will appear here. If not in use by an ASIO software, “none” is displayed here, as shown in the above example.
6 – Buffer Size: The ASIO buffer size in use. Note this field is only active when in use by an ASIO application. As your DAW software documentation will likely tell you, the ASIO Buffer Size will affect the “responsiveness” and “latency” of the DAW software. The lower the setting, the faster the response, but with the
*Note that POD Studio, TonePort and GuitarPort devices also offer ToneDirect™ Monitoring, which is a separate audio path with its own Buffer setting. This allows you to keep the above ASIO Buffer Size at a high “stable” value, yet still benefit from low latency monitoring of your input signal while recording. Similarly, POD devices offer a USB audio buffer which provides an independent, direct monitor signal with its own buffer adjustment as well. More info on ToneDirect monitoring can be found in this section.
7 – Bit Depth: The ASIO bit depth in use. Note this field is only active when in use by an ASIO application. It is recommended to use the
8 – Sample Rate Converter Active indicator: POD Studio, TonePort & GuitarPort devices support
44.1and 48 kHz sample rates natively, and also support 88.2 and 96 kHz sample rates by way of an internal sample rate converter. This indicator lights up to show you when this converter is active, which can be any time your ASIO software is requesting a different sample rate than what your device “natively” supports. UX8 and POD X3 family devices support 44.1, 48, 88.2 and 96 kHz sample rates natively.
9 – Driver Operation indicator:
POD Studio, TonePort & GuitarPort devices - Displays what sample rate and bit depth the current device is operating at (or with no text if not in use).
10 – Lock Driver Format: When checked, this forces the Line 6 audio driver to operate at the Sample Rate and Bit Depth settings entered in the two fields below (as opposed to following the sample rate requested by a Windows audio application).
Note – This checkbox will remain
Windows Vista users... you won’t see these options in this portion of the dialog since these driver format options are handled by Vista itself. You will instead see a Sound Control Panel button:
3•3