Line 6 TonePort DI, GX, UX1 Mixer View, Reference Control, Mute/Bypass Switches, Mute Main Outs

Line 6 POD Farm 1.01 – POD Farm Standalone Operation

Reference Control

The Tuner’s Reference Control tells the Tuner what to use as the base tuning reference note. 440Hz is the standard reference value for A and is generally used for tuning reference in modern, western music. Unless you have a particular need to adjust the Tuner’s reference, you probably want to stick with the standard 440Hz setting for this control. To adjust the reference, either click on the number and drag up/down, or double click and enter the desired reference frequency.

Mute/Bypass Switches

The Mute and Bypass switches let you choose whether to Mute your guitar input signal or to hear it while tuning (with amp/cab/effect processing bypassed).

Mixer View

Device Send Name Source Menu Preferences and Driver Console Buttons

Mute Main Outs Send Level Meter Send Level Fader +18 dB Button

Mute Main Outs

The Mute button silences POD Farm’s signal that is fed to your hardware’s Main Outputs.

•The POD Farm Tone 1 and Tone 2 signals are still fed to the Headphone outs and Record Sends.

•This feature facilitates recording with microphones, (e.g. - recording vocals, in the same room as the monitor speaker system). Simply, press the Mute Line Out button and listen via Headphones while recording vocals in the same room.

Record Send Controls

The controls in this section allow you to select the type of signal routed to POD Farm’s Record Sends* 1-2 & 3-4 (or Sends 9-10 & 11-12 for UX8 devices). You can think of the two Record Sends as “virtual pipelines” that each carry a stereo output signal from POD Farm, allowing you to select these POD Farm signals within your recording software as Input sources for recording into audio tracks. Here you can control what signal is fed to each of the two Record Sends, and set their levels.

*Note that the Record Send Source selection and Level controls do not affect the POD Farm Monitoring signal. These controls affect only the POD Farm signals fed to your Record Sends, providing you with independent control over your software recording levels versus your Monitoring signals!

5•4