Line 6 TonePort KB37, TonePort UX8 GX POD Studio & TonePort, Connect your electric Guitar or Bass

POD Farm 1.01 – UsingYour Line 6 Hardware

GX (POD Studio & TonePort)

Connect your electric

Guitar or Bass

Instrument Input - To input your electric guitar or bass, plug it in here using a standard 1/4-inch TS instrument cable. When in POD Farm Standalone operation, this inputs the signal into POD Farm, where you can choose your Tone, and then route the processed signal both to the Record Sends (to your audio software) and directly to the GX hardware outputs.

Connect your stereo

Headphones/Line Out Cable

Connect USB cable from here to your computer

USB - This of course is where you connect the supplied USB cable to GX, with the other end going to your computer’s USB 1.1 or 2.0 port.

Line Out/Phones - Connect here to either a monitoring system or stereo headphones, using an 1/8- inch stereo cable. When connecting GX as an audio interface for your recording application, this line out/headphone jack outputs the playback audio from your audio software on the computer, as well as anything plugged into the Instrument input. If you ‘re using a 3rd-party audio interface, these outputs supply the ToneDirect™ magic to your interface or mixer, when using POD Farm in Standalone operation alongside the plug-in. See the ToneDirect™ Monitoring section for more details.

2•2