Making a partial settings
M-103
MV-8800 Owner’s Manual
5
Creating a patch
Exclusive Group
If this is set to anything other than Off, partials with the same Exclusive Group setting will not play at the same
time.
Partial Coarse Tune
Adjusts the pitch of the partial in steps of a semitone.
Partial Fine Tune
Adjusts the pitch of the partial in steps of one cent.
Filter Type
Selects the type of filter.
If this is Off, the filter will not be used.
Cutoff Frequency
Specifies the frequency at which the filter is to start being applied (the cutoff frequency).
Resonance
Boosts the sound in the region of the cutoff frequency, adding a distinctive coloring to the tone.
Filter Envelope Time 1(A)
Specifies Time 1 of the filter envelope. This is also called “filter attack time.”
Filter Envelope Time 4(R)
Specifies Time 4 of the filter envelope. This is also called “filter release time.”
Amp Envelope Time 1(A)
Specifies Time 1 of the amp envelope (the time from when you press the velocity pad to begin producing sound
until the maximum volume is reached). This is also called “amp attack time.”
Amp Envelope Time 3(D)
Specifies Time 3 of the amp envelope (the time from when the maximum volume is reached until when the
sound decays to the amp sustain level). This is also called “amp decay time.”
Amp Envelope Level 3(S)
Specifies Level 3 of the amp envelope (the volume level at which the sound will remain after the amp decay
time has elapsed, until you release the velocity pad).
This is also called “amp sustain level.”
Amp Envelope Time 4(R)
Specifies Time 4 of the amp envelope (the time from when you release the velocity pad until the sound decays
to silence). This is also called “amp release time.”
LFO Rate
Specifies the rate (frequency) of the waveform produced by the LFO.
This can also be synchronized to the tempo of the sequencer.
LFO Wave Form
Selects the waveform that the LFO will output.
LFO Pitch Depth
Specifies the amount by which the LFO will affect the pitch of the partial.
LFO Pan Depth
Specifies the amount by which the LFO will affect the panning of the partial.
LFO Filter Depth
Specifies the amount by which the LFO will affect the filter of the partial.
LFO Amp Depth
Specifies the amount by which the LFO will affect the output volume of the partial.
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
MV-8800_e.book 103ページ ２００６年１１月１０日　金曜日　午後１時４８分