Roland MV-8800 Placing patterns in the pattern track, , Placing patterns in the pattern track, , Realtime recording,

Placing patterns in the pattern track
M-165
MV-8800 Owner’s Manual
Recording a song / pattern
9
Realtime recording
1.
Access the SONG screen (Screen Guide; p. 8).
2.
Use CURSOR [ ] [ ] to select the pattern track.
3.
Press [REC ( )].
The RECORDING PARAMETER (PATTERN) popup (Screen Guide; p. 20) will appear.
4.
Press [PLAY ( )].
Step recording
1.
Access the SONG screen (Screen Guide; p. 8).
2.
Use CURSOR [ ] [ ] to select the pattern track.
You can play patterns by striking the pads.
3.
Press [SHIFT] + [REC ( )].
The PATTERN STEP REC screen (Screen Guide; p. 110) will appear.
fig.pattern-step-rec.eps
4. Strike the pads to record patterns into the pattern track.
5.
When you’re finished, press [STOP ( )].
Placing patterns in the pattern track
● If there is no pattern track, you’ll need to create one as described in “Creating the pattern track” (p. 164).
● If you want to assign a pattern to a pad, refer to “Assigning a pattern to a pad” (p. 144).
● If you want to place a pattern that’s not assigned to any pad, press [F4](Put Pattern). The PUT PATTERN popup
will appear. Use the Pattern field to select the pattern that you want to place in the pattern track, and use the
Times field to specify the number of times that it is to be placed. Then press [F5](Execute) to place the specified
pattern in the pattern track.
MV-8800_e.book 165ページ ２００６年１１月１０日 金曜日 午後１時４８分