Operations using the external display
M-273
MV-8800 Owner’s Manual
Using an external display and mouse to operate the MV-8800
16
●
Selecting and adding tracks
1.
Click the Track Name of the MIDI Track.
The color of the track will change, and it will become the current track.
When you strike a pad, the patch will sound according to the Output Assign parameter of the current track.
2.
Right-click the Track Name of the current Track.
A list will appear
3.
Click “Add MIDI Tracks... .”
The ADD MIDI TRACKS popup will appear.
4.
Click .
A MIDI track will be added, and will become the current track.
●
Editing the name of a track
1.
Double-click The Track Name of current track.
The EDIT TRACK NAME popup will appear. Click a key on the keyboard to edit the name of the track.
Then click .
●
Recording and Undo
❍
Preparations
•
If looping is turned off, click the Loop button.
•
If the sequencer is stopped, click the Play button.
1.
Strike the pads to rehearse your recording.
It’s a good idea to practice before you begin recording.
2.
Click the Record button.
Recording will begin. Strike the pads to perform.
3.
Click the Undo button
Cancel the results of an recording (Undo). The Undo button will blink.
4.
Click the Undo button again.
The content you erased by Undo will be recovered (Redo). The Undo button will lit (light blue). Undo and Redo
will alternate each time you click.
●
If there’s no sound, try clicking the pad bank button to change the pad bank. Alternatively, try a different track.
●
The loop region will be recorded repeatedly.
●
When you execute Undo, the recording state will be defeated, and you will return to playback.
MV-8800_e.book 273ページ ２００６年１１月１０日　金曜日　午後１時４８分