Editing a region you specify (Sequence Editing)
M-172
MV-8800 Owner’s Manual
7.
Use the cursor to select a command, and press [F5](Select).
A popup that lets you specify the editing parameters for each command will appear.
8.
Set the parameters for the selected command. (If you’re executing the Erase or Cut
command, there are no parameters to set.)
9.
Press [F5](Execute).
The sequence editing command will be executed.
●
If you selected the Erase or Cut command, the operation will be executed in step 7. Steps 8 and 9 are not
necessary.
●
If you decide to leave an edit screen without executing, press [EXIT].
●
If you’re not satisfied with the results of your editing, you can press [UNDO/REDO] to return to the state prior to
editing. For details on the Undo function, refer to “Undoing a recording or editing operation (Undo/Redo)” (p.
166).
MV-8800_e.book 172ページ ２００６年１１月１０日　金曜日　午後１時４８分