M-30

MV-8800 Owner’s Manual

Using the CD-R/RW drive

●

Cautions when using the CD-R/RW drive

•

Place the MV-8800 on a stable and level surface that is not subjected to vibration by external sources. If the
unit is tilted significantly, this may adversely affect the operation of the CD-R/RW drive.
•
If you move the unit between locations of dramatically differing temperature and humidity, condensation
(water droplets) may form on the CD-R/RW drive. Using the unit in this state will cause malfunctions; leave
the unit for several hours to allow the condensation to disappear before attempting to use it.
•
Never attempt to use the emergency eject hole to eject the disc tray when the MV-8800 is operating (when
the MV-8800’s DISK indicator or the CD-R/RW drive access indicator are lit).
•
Remove the disc from the disc tray before you turn the power on or off.
•
Remove the disc from the disc tray when transporting the MV-8800.
•
Do not place anything other than a disc bearing the logo (e.g., wires, coins, any other type of disc) on
the disc tray. Doing so will damage the CD-R/RW drive.
•
Do not touch the lens. Doing so will make it impossible for data to be read or
written normally, and you may experience skips during playback or recording.
•
If the lens becomes dusty, you may clean it using a commercially-available lens
blower-brush sold for use with camera equipment.

●

Cautions for CD-R/RW disc handling

•

Do not use a conventional audio CD player to play back a CD-R/RW disc used to back up a project. Doing
so will produce a high-volume sound that can damage your hearing and/or your speakers.

•

Do not bend a disc, since this may make the disc unreadable or unwritable, and may cause malfunctions.

•

Do not drop or stack discs.

•

Do not place heavy objects on a disc or subject it to strong impact.

•

To hold a disc, insert your finger in the hole and grasp it by the outer edge as
shown in the diagram. Do not allow fingerprints or scratches to occur on the
recording surface (the unprinted side), since this can make the data unreadable.

•

Do not use discs in excessively dusty locations.

•

Do not leave discs in direct sunlight or in a closed automobile.

•

Do not leave a disc in the CD-R/RW drive for an extended time.

•

To protect the disc, store it in its original case.

•

Do not affix foreign objects such as labels to the label surface of the disc.

•

When writing the title etc. on the label surface of the disc, use a soft felt-tipped marker.

•

If the disc becomes soiled, use a soft dry cloth to wipe it lightly from the center of the disc
straight toward the outer edge. Do not wipe in a circular direction.

•

Do not use cleaning agents such as cleaners or sprays made for vinyl records, or
solvents such as benzene.
Emergency eject hole Eject button
Access indicator
Lens
MV-8800_e.book 30ページ ２００６年１１月１０日　金曜日　午後１時４８分