Roland MV-8800 Setting the effect parameters

M-211
MV-8800 Owner’s Manual
Using effects
12
Setting the effect parameters
You can edit the current effect settings to create your own effect settings.
1.
Press [EFFECTS].
The EFFECT screen will appear.
2.
Move the cursor to the effect whose settings you want to change.
3. Press [F5](Edit).
The screen that appears will depend on the current effect.
4.
Use CURSOR [ ] [ ] [ ] [ ] to move the cursor to the parameter you want to edit, and
use the VALUE dial or [DEC] [INC] to edit the value.
The effect setting will change.
Current effect Screen that appears
MFX MFX EDIT screen (Screen Guide p. 231)
Dly/Cho DELAY/CHORUS EDIT screen (Screen Guide p. 231)
Reverb REVERB EDIT screen (Screen Guide p. 231)
●Editing separate blocks of an MFX
If you’ve selected MFX as the current effect, the algorithm is a combination of several
types of effects. You can edit each of these effects (effect blocks) separately.
1. Access the MFX EDIT screen as described in “Setting the effect parameters”
(p. 211).
2. Use [F1](Block
▲)/[F2](Block▼) to select the effect block you want to edit.
The tabs at the left edge of the screen show the effect block highlighted.
3. Use CURSOR [ ] [ ] [ ] [ ] to move the cursor to a parameter, and turn
the VALUE dial or use [DEC] [INC] to edit the value.
The effect setting will change.
MV-8800_e.book 211ページ ２００６年１１月１０日 金曜日 午後１時４８分