M-212
MV-8800 Owner’s Manual
Storing the current effect settings in the library
After you’ve edited the effect parameters to create your own effect settings, you can store them in the library
and recall them later when needed.
1.
Press [EFFECTS].
The EFFECT screen will appear.
2.
Move the cursor to the effect that you want to store in the library.
3.
Press [F3](Library).
The screen that appears will depend on the current effect.
4.
Turn the VALUE dial or use [DEC] [INC] to select the user area number in which you want to
store your settings.
The user area is the section of memory in which you can store your own settings. The user area consists of
the effect library numbers preceded by a “U” character.
5.
Press [F1](Write Here).
A message of “Write current to U###. Are You Sure?” will appear. (## is a effect library number.)
6.
Press [F5](Yes).
The current effect settings will be written into the effect library number you selected.
Current effect Screen that appears
MFX MFX LIBRARY popup (Screen Guide; p. 230)
Dly/Cho DELAY/CHORUS LIBRARY popup (Screen Guide; p. 230)
Reverb REVERB LIBRARY popup (Screen Guide p. 230)
●
For details on the number and structure of the effect library, refer to “Preset Patches and Algorithm List”
(Appendices; p. 14).
●
You can’t save settings in the preset area (effect library numbers preceded by a “P”).
●
Once you overwrite a library number, there’s no way to recover its previous contents. You may want to save the
user library to disk before you overwrite your own settings.
MV-8800_e.book 212ページ ２００６年１１月１０日　金曜日　午後１時４８分