M-214
MV-8800 Owner’s Manual
Using the C (Control) knobs to operate parameters
You can assign the C1–C3 knobs to the desired effect parameters, and use the knobs to control the parameter
values.
1.
Press [EFFECTS].
The EFFECTS screen (Screen Guide; p. 229) will appear.
2.
Use CURSOR [ ] [ ] to select the effect you want to control.
3.
Press [F5](Edit).
The EFFECTS EDIT screen (Screen Guide; p. 231) will appear.
4.
Move the cursor to the parameter you want to control using a C knob.
5.
Press [F3](Knob Assign).
The KNOB ASSIGN popup (Screen Guide; p. 234) will appear.
6.
Press [F1](C1)–[F3](C3) to specify the knob that will control the parameter you selected in
step 4.
Now you can use the selected knob to control the value of the parameter.
MV-8800_e.book 214ページ ２００６年１１月１０日　金曜日　午後１時４８分