Roland MV-8800 , Recording your pad performance just as you play (Realtime Recording), Basic procedure for realtime recording

Recording MIDI tracks (instrument or external MIDI sound module)
M-152
MV-8800 Owner’s Manual
Realtime Recording is the recording method in which your playing on the pads and your controller operations
are recording exactly as you perform. This method is best when you want to capture the expressive feel of
your performance.
Basic procedure for realtime recording
1.
Use CURSOR [ ] [ ] to select the track you want to record.
Selected track is highlighted (that means current track). Recording occurs on the current track.
2. Press [REC ( )].
The REC indicator will blink, and the RECORDING PARAMETER (MIDI) popup (Screen Guide; p. 16) will
appear.
3.
Set the parameters for realtime recording.
Move the cursor to each parameter value, and use the VALUE dial or [DEC] [INC] to set the value.
• Rec Mode
Use this to specify the method by which you will record events.
• Count In
Specifies how recording will begin.
Recording your pad performance just as you play (Realtime Recording)
Value Explanation
OverDub1 The new material you record will be added to the existing material without erasing it.
By using this type in conjunction with Loop Recording, you can repeatedly record over a
specified region without erasing the existing material.
For example this is a convenient way to record a drum track, since you can record bass drum
→ snare drum → hi-hat etc. on each successive pass.
OverDub2 When newly recorded note events at the same time location as previously recorded note events
will replace the older events.
Replace The new material you record will replace the existing material.
Use this type when you want to re-record your performance.
Value Explanation
Off Recording will begin the moment you press [PLAY ( )].
1 Meas When you press [PLAY ( )], a count-in will sound from one measure earlier than the record-start
location, and recording will begin at the record-start location.
2 Meas When you press [PLAY ( )], a count-in will sound from two measures earlier than the record-start
location, and recording will begin at the record-start location.
Wait Note Recording will begin the moment you strike VELOCITY PADS, press [PLAY ( )] or receive MIDI note
messages.
MV-8800_e.book 152ページ ２００６年１１月１０日 金曜日 午後１時４８分