Roland MV-8800 Using a mouse, , Mouse operations

Using a mouse
M-253
MV-8800 Owner’s Manual
Using an external display and mouse to operate the MV-8800
16
● Operating the wheel
Turn the wheel toward or away from yourself.
After clicking on a numerical parameter, you can turn the wheel to raise or lower the value.
The wheel can be used only for numerical parameters; it cannot be used to operate buttons
or knobs.
● Drag
Move the mouse while holding down the mouse button.
For example by dragging an event shown in a play list, you can
change the starting time or the track of that event. By dragging a
knob you can change its setting.
● Drag&Drop
Drag, and then release the mouse button at the desired location.
The sequence data or knob you dragged will move to the position at
which you released the button.
Here’s how to operate the buttons and knobs shown in the screen.
● Menu Bar
Click an item in the menu bar, and a list showing the contents of that item will appear. In the list, click the
desired item.
● Buttons
You can click on “buttons” shown in the screen to execute various operations or to select parameters.
● The wheel can also be clicked just like the left or right buttons, but the MV-8800 does not use this action.
Mouse operations
2
1
Press
Move while holding down
2
3
1
Press
Release your finger
from the button
Move while holding down
MV-8800_e.book 253ページ ２００６年１１月１０日 金曜日 午後１時４８分