M-228
MV-8800 Owner’s Manual
Combining a song / pattern into two tracks (Mixdown)
To perform a mixdown, you’ll switch to Mixdown mode and record the mixdown on the hard disk.
1.
Press [MASTERING].
The MIXDOWN / MASTERING MENU screen (Screen Guide; p. 196) will appear.
2.
Press [F1](Mixdown) or use CURSOR [ ] [ ] to select the MIXDOWN MODE icon then
press [ENTER].
If Mixdown mode is off, the display will ask “Enter Mixdown Mode. Are you sure?”
3.
Move the current time to the location at which you want to start mixdown.
4.
Turn the MASTER knob to MAX.
If you mix down without setting the MASTER knob to MAX, the volume will be lower. You should leave this
knob at MAX unless you are creating a fade-in or fade-out.
5.
Press [REC ( )].
The EDIT MIXDOWN FILE NAME popup (Screen Guide; p. 3) will appear.
6.
Specify a filename.
A default filename is assigned automatically. You can change this if desired.
7.
Press [F5](OK).
The REC indicator (red) will blink, and the MV-8800 will be in mixdown-standby.
8.
Press [PLAY ( )].
Mixdown will begin. REC indicator (red) and PLAY indicator (green) will lit.
F-button Action
[F1](No) Cancels the procedure, and returns to the MIXDOWN / MASTERING MENU screen.
[F5](Yes) Turns Mixdown mode on. You will go to the SONG screen, which will indicate “** Mixdown Mode **.”
Continue to step 3.
●
If Mixdown mode is on, the display will ask “Exit Mixdown Mode. Are you sure?” If you then press [F5](Yes),
Mixdown mode will switch from on to off.
●
If you press [EXIT] in step 6, the EDIT MIXDOWN FILE NAME popup will close without entering standby mode.
●
If you specified mixdown filename is onto a MIXDOWNTR folder that already contains setting, “That name
already exists. Overwrite?” message will appear.
If you press [F1](No), you can edit filename again. If you press [F5](Yes), the previous data will be overwritten.
●
If you operate the mixer or effects during mixdown, your changes will be reflected in the mixdown data.
●
During the mixdown, sounds received at the analog inputs, will also be recorded. If the MV-8800’s sequencer
is playing an external MIDI sound module, you can connect the audio output of your MIDI sound module to the
MV-8800’s inputs so that the sound from your MIDI sound module will be recorded as part of the mixdown.
MV-8800_e.book 228ページ ２００６年１１月１０日　金曜日　午後１時４８分