Roland MV-8800 Writing the mastered data to CD

Writing the mastered data to CD
M-233
MV-8800 Owner’s Manual
Creating an audio CD
14
7.
Adjust the length of the silence between songs.
Press [MENU], select “Gap Time,” and press [F5](Select). The GAP TIME popup (Screen Guide; p. 207) will
appear.
Set the GAP TIME parameter to the length of the silence you want to insert. (The initial value is 2.00 seconds.)
The specified amount of silence will be inserted in front of the track
8.
When you’re finished making settings in the cue sheet, press [F5](Write CD).
The WRITE CD popup will appear.
9.
Press [F5](Yes).
Writing will begin. When writing is completed, the CD-R/RW drive tray will open with the message “Completed.
Make another?”. Remove the disc.
If you want to create another audio CD with the same content, insert a blank CD-R/RW disc and press
[F5](Yes). (An audio CD of the same content will be created.)
Your original audio CD is finished!
F-button Explanation
[F4](SetAll) Changes the gap time of all tracks.
[F5](Set) Changes the gap time of the track at which the cursor is located.
● The GAP TIME parameter you specify here is also called the “pre gap”
● If you’re making a CD of a live performance or similar source, you can set the GAP TIME parameter of each
track to 0 so that the tracks will be connected.
● The speed at which the data is written to the CD will be selected automatically, according to the optimal speed
supported by the media you’re using.
● The MV-8800’s CD writing method is fixed at “Disc At Once,” meaning that you will be able to use this disc as
a pressing master for commercial mass production. When the Disc At Once method is used, no further data can
be written to the disc afterward, even if there is space (recording time) remaining on the disc.
MV-8800_e.book 233ページ ２００６年１１月１０日 金曜日 午後１時４８分