Explanation of screens shown in the external display
M-257
MV-8800 Owner’s Manual
Using an external display and mouse to operate the MV-8800
16
fig.launcher-block2
●
Inspector Area (When the current track is MIDI track)
Explanation
Effects button The EFFECTS popup will appear. Here you can make settings for the built-in MFX,
Delay/Chorus and Reverb.
Effect Section
Selector
This selects the effect module (MFX, delay/chorus, reverb) that will be controlled by the C1–
C3 knobs.
Mixer button The MIXER popup will appear. Here you can adjust the volume and panning of the audio
tracks and instrument parts.
Mixer Section
Selector
This displays mixer sections which can be controlled by the eight sliders on the MV-8800’s
panel. A list of the available mixer sections will appear when you click this.
The available mixer sections are:
•
“Audio” (Audio Track 1-8)
•
“Part 1-8” (Instruments Part 1-8)
•
“Part 9-16” (Instruments Part 9-16)
•
“Aux/In” (AUX 1-4, Effects Return, Audio Phrases, Input)
•
���Assign” (Assignable Slider)
Region In/Out
button
This button specifies the current time location as region-in (beginning of the selected region)
or region-out (end of the selected region).
Region In/Out point This area indicates the region-in time (at left) and region-out time (at right). You can click a
numerical field and change the time.
Explanation
Current Track
Number/Name
Display the current track number and current track name.
Output Assign
(Instrument)
This indicates the instrument part played by the current track. If you click this area, show the list of the
instrument part, MFX, Pix Jam, and mixer automation channels.
Output Assign
(MIDI)
Specifies the MIDI connector and channel used for MIDI output of the data from the MIDI track. Click
this to view a list of the MIDI output destinations.
Quantize Type Display the setting of quantization of the current track. Click this to view a list of the quantize types.
Strength Display the strength of playback quantization. You can click the numerical value to edit the strength.
(This is displayed when the Quantize Type is set to Grid or Shuffle.)
Resolution Display the quantization timing. You can click the numerical value to edit the resolution. (This is
displayed when the Quantize Type is set to Grid or Shuffle.)
Rate This indicates the amount of “swing” that will be applied when the Quantize Type is set to Shuffle. You
can click the numerical value to edit the rate.
Template This indicates the template name that will be applied when the Quantize Type is set to Template. You
can click the template name to show the template list and select the other template.
Velocity This indicates the strength of the velocity correction that will be applied when the Quantize Type is set
to Template. You can click the numerical value to edit the velocity.
Quantize Type=
Off
Grid
Shuffle
Template
MV-8800_e.book 257ページ ２００６年１１月１０日　金曜日　午後１時４８分