Velocity pad operations
M-37
MV-8800 Owner’s Manual
Velocity pad operationsIntroduction
1.

Press [PAD BANKS].

The PAD BANKS indicator (red) will light, and the PAD BANKS popup (Screen Guide; p. 5) will appear.
2.

Press [F1](Name).

The EDIT PAD BANK NAME (Screen Guide; p. 3) will appear. Input the desired bank name.
3.

When you’ve finished entering the name, press [F5](OK).

Here’s how you can disable the velocity sensitivity of the pads.
1.

Press [FIXED VELOCITY].

The indicator will light orange, and the FIXED VELOCITY function will be turned on. In this state, the pads will
produce a fixed velocity (initial value = 127) regardless of how strongly you strike them.
You can set the velocity value as desired. Refer to “Fixed Velocity Level” (p. 174).
Here’s how you can use the sixteen velocity pads to play a single partial over sixteen different velocity levels.
1.

Strike the VELOCITY PADS whose sound you want to play over sixteen pre-determined

velocity levels.

The sound you play will be selected.
2.

Press [MULTILEVEL].

The indicator will light orange, and the MULTILEVEL function will be turned on. In this state, pad 1 plays a low
velocity and pad 16 plays the maximum velocity.
Naming a pad bankFixed Velocity function
●
To turn off the FIXED VELOCITY function, press [FIXED VELOCITY] once again to make the indicator go dark.
Multilevel function
●
Your actual playing strength is ignored while MULTILEVEL is on.
●
To turn off the MULTILEVEL function, press [MULTILEVEL] once again to make the indicator go dark.
●
The pad you strike determines which of the sixteen velocity levels are produced.
Pad Velocity Pad Velocity Pad Velocity Pad Velocity
1 7 5 39 9 71 13 103
2 15 6 47 10 79 14 111
3 23 7 55 11 87 15 119
4 31 8 63 12 95 16 127
MV-8800_e.book 37ページ ２００６年１１月１０日　金曜日　午後１時４８分