Editing note events in a MIDI track (Piano Roll Editing)
M-178
MV-8800 Owner’s Manual
8.

Use the cursor to select a command, and press [F5](Select).

A popup will appear, allowing you to specify the editing parameters for the command you selected.
9.

Set the parameters for the selected command. (If you’re executing the Erase command,

there are no parameters to set.)

10.Press [F5](Execute).
The piano roll editing command will be executed.
●
The list of editing commands will differ according to the screen that is displayed. For a list of the available
commands, refer to “List of available editing commands” (p. 187).
●
If you selected the Erase command, the operation will be executed in step 8. Steps 9 and 10 are not necessary.
●
If you decide to leave an edit screen without executing, press [EXIT].
●
If you’re not satisfied with the results of your editing, you can press [UNDO/REDO] to return to the state prior to
editing. For details on the Undo function, refer to “Undoing a recording or editing operation (Undo/Redo)” (p. 166).
You can make the following settings in the PIANO ROLL EDIT screen.
•Step Time (The unit by which the current time will move when you press STEP [ ] [ ])
•Track parameters of the current track
•Solo switch of the current track
1.

Access the SONG screen (Screen Guide; p. 8) or the PATTERN screen (Screen

Guide; p. 91).

2. Use CURSOR [ ] [ ] to select the MIDI track you want to edit.
3. Press [F4](Piano Roll).
The PIANO ROLL EDIT screen will appear.
fig.piano-roll.eps
4. Press [MENU].
The MENU popup will appear.
•Step Time
Displays the STEP TIME popup (Screen Guide; p. 58). Specifies the unit by which the current time
will move when you press STEP [ ] [ ].
•Track Parameter
Displays the TRACK PARAMETER popup (for MIDI track).
•Solo On/Off
Turns solo on/off for the current track.
MV-8800_e.book 178ページ ２００６年１１月１０日　金曜日　午後１時４８分