Making a partial settings
M-105
MV-8800 Owner’s Manual
5
Creating a patch
1.

Access the PARTIAL EDIT screen as describe“Making a partial settings” (p. 102).

2.

Press [F1](Sample Edit).

The SAMPLE EDIT screen (Screen Guide; p. 128) will appear.
SMT number, sample name
Specifies the SMT number and sample name that you are actually editing.
Start Point
Adjusts the point at which the playback of the sample starts.
Loop Point
Adjusts the point at which repeated portion (the second and subsequent times) will begin playing.
Set this if you want to the sample to loop from a point other than the Start Point.
End Point
Adjusts the point at which the playback of the sample will end.
Loop Mode
Specifies how the sample will play.
Loop Tune
Adjust the playback pitch of the loop region in step of one cent.
Making a sample settings
●
You can use [SHIFT] + CURSOR [ ] [ ] [ ] [ ] to zoom-in or zoom-out the waveform display.
●
When the cursor is located at Start Point, Loop Point, or End Point, you can use PREVIEW [TO ( )] /
[FROM ( )] to audition the data before or after that point.
●
For details on each parameters refer to “SAMPLE EDIT screen” (Screen Guide; p. 128).
1
2
3
4
5
6
1
2
2
3
4
5
6