Importing images
M-287
MV-8800 Owner’s Manual
Using the velocity pads to display images (Pix Jam)
17
You can record image-switching events on the sequencer, so that images will switch in synchronization with
the sequencer playback.
●
Recording the changes
1.
Press [SONG] to access the SONG screen, or press [PATTERN] to access the PATTERN
screen.
2.
Use CURSOR [ ] [ ] to select a MIDI track you want to record.
Selected track is highlighted (that means current track). Recording occurs on the current track.
3.
Press [F2](Track Param).
The TRACK PARAMETER popup (for a MIDI track) (Screen Guide; p. 11) will appear.
4.
Set the Output Assign parameter to “Pix Jam.”
This track is used only for switching images.
5.
Press [F5](Close).
The TRACK PARAMETER popup (for a MIDI track) (Screen Guide; p. 11) will close.
6.
In the same way as for conventional realtime recording or step recording, strike the
appropriate pad at the moment you want the image to be switched.
Data that specifies the timing of the image switch will be recorded in the image switching track.
Switching images in synchronization with sequencer playback
●
When the Output Assign parameter is set to Pix Jam, the PAD BANKS parameter setting is ignored.
MV-8800_e.book 287ページ ２００６年１１月１０日　金曜日　午後１時４８分