Synchronizing the MV-8800 with a connected external sequencer
M-305
MV-8800 Owner’s Manual
Using MIDI devices
19
4.
Set the synchronization parameters.
Here you will set parameters to specify how MIDI Clock synchronization will occur. Refer to the table below,
and make the appropriate settings on the MV-8800 and on the externally connected master device (the
sequencer or recorder that is transmitting the synchronization signals). For details on how to make settings on
your master device, refer to its owner’s manual.
5.
Play back the master device.
Press the PLAY button on the master device; the MV-8800 will begin running in synchronization.
❍
Pattern Mode
1.
Press [PATTERN].
The PATTERN screen (Screen Guide; p. 91) will appear.
2.
Press [MENU].
The MENU popup will appear.
3.
Select Pattern Sync and press [F5](Select).
The PATTERN SYNC screen (Screen Guide; p. 94) will appear.
The rest of the procedure is the same as in Song mode.
Parameter Setting on the MV-8800 Settings on the externally connected master device
Sync Mode Slave-MIDI (MIDI) Set the device so that it will transmit MIDI Clock messages (Master).
●
For an explanation of the other parameters, refer to “SYNC screen” (Screen Guide; p. 81).
●
When synchronized as a MIDI Clock slave, “Wait Note” of the Count In setting is not available.
MV-8800_e.book 305ページ ２００６年１１月１０日　金曜日　午後１時４８分