List of available editing commands
M-188
MV-8800 Owner’s Manual
Here’s how you can move the specified region of performance data. The data recorded in the move-source
region will be replaced by rests. This editing command is useful in situations like the following.
•
When you want to move or transpose a phrase (when using Piano Roll editing)
•
When you want to move sequence data from one track to a different track (when using Sequence editing)
❍
Parameters to specify
•
To
Specify the new time to which the data will be moved.
•
Transpose
Move the pitch of the note messages upward or downward.
•
To Track
Specify the track to which the data will be moved. If you’re moving more than one track, this parameter is
invalid.
•
Mode
Specify what will happen if performance data exists at the move-destination.
●
For details on all of the Move-related parameters and settings, refer to “MOVE popup” (Screen Guide; p. 36).
●
The Transpose parameter is available if you accessed the MOVE popup from the PIANO ROLL EDIT screen.
●
The To Track parameter is available if you accessed the MOVE popup from the SEQUENCE EDIT screen.
Setting Explanation
Mix The moved data will be merged (combined) with the data existing at the destination.
Replace The moved data will replace (overwrite) the data existing at the destination.
●
If the track(s) being moved include audio tracks or pattern tracks, the Mode parameter is fixed at Replace.
Moving performance data (Move)
MV-8800_e.book 188ページ ２００６年１１月１０日　金曜日　午後１時４８分