Roland MV-8800 Using effects

Using effects
M-209
MV-8800 Owner’s Manual
12
Chapter 12
Using effects
The MV-8800 contains three effects processors: MFX (multi-effects), delay/chorus, and reverb.
Switching the effects on/off
Each of the MV-8800’s internal effects can be switched on or off. You can switch the effects off if you’re editing
a sound and want to hear it without effects, or if you want to use an external effect processor instead of the
built-in effects.
1. Press [EFFECTS].
The EFFECTS screen (Screen Guide; p. 229) will appear.
2.
Use CURSOR [ ] [ ] to move the cursor to the effect you want to switch on/off. This
effect becomes the “current effect.”
The effect you select is enclosed in a frame and highlighted.
3.
Press [F4](FX On/Off).
Each time you press this, the current effect will be switched on or off.
● For details on the MV-8800’s built-in effects, refer to “Preset Patches and Algorithm List” (Appendices; p. 14).
● The effect on/off settings are remembered for each song.
MV-8800_e.book 209ページ ２００６年１１月１０日 金曜日 午後１時４８分