Toshiba MMU-AP0091H service manual 208, Disassembling Example, Heat exchanger Right

No.	Part to be	Work procedure	Remarks
	exchanged
3	Heat	REQUIREMENT	2) Motor base
	exchanger
		Wear protective clothing on your hands as
		other components may cause and injury etc.
		Before beginning the procedure, ensure the	Heat exchanger
		refrigerant has been reclaimed from the	(Left)
			Heat exchanger
		outdoor unit, using a suitable refrigerant
			(Right)
		recovery device.
			3) Motor base bracket
		M Disassembling (Example):	5) Support
		Heat exchanger (Right)

1)Remove the cabinet.

2)Remove the motor base. (M5 × 10, 4 pcs.)

3)Remove the motor base bracket. (M5 × 10, 5 pcs.)

		4) Heat exchanger
4)	Remove the screws on the heat exchanger	fixing board
	fixing board. (M5 × 10, 6 pcs.)
5)	Remove the screws on the support.	6) Waterproof board
	(M5 × 10, 3 pcs.)
6)	Remove the screws on waterproof board.
	(M4 × 10, 3 pcs.)

7)Remove the brazing section on the con- nected pipe (8 positions).

8)Remove the screws on the support at the

rear side, and then pull out the heat ex-	7) Brazing section
changer. (M5 × 10, 2 pcs.)
	(4 positions at header side)

7) Brazing section

(4 positions at distributor side)

8) Rear side

8) Support

Draw it out it backwards.

(Draw it out forwards in case of a left side heat exchanger.)

208