TMP92CZ26A

92CZ26A-346

3.15.4 I2C Bus Mode Control Register

The following registers are used to control and monitor the operation status when using
the serial bus inter face (SBI) in the I2C bus mod e.
Serial Bus Interface Control Register 0
7 6 5 4 3 2 1 0
Bit symbol SBIEN
Read/Write R/W R
After Reset 0 0 0 0 0 0 0 0
Function SBI
operation
0 : disable
1 : enable
Always read “0”.
<SBIEN> : When using SBI, <SBIEN> should be set “1” (SBI operation enable) before setting each register of SBI
module.
Figure 3.15.3 Registers for the I2C bus mode
Prohibit
Read-
modify-
Write
SBICR0
(1247H)