TMP92CZ26A

92CZ26A-38

(3) Operation
a. IDLE2 Mode
In IDLE2 Mode, only specific internal I/O operations, as designated by the
IDLE2 Setting Reg iste r, can take place. Instructio n execution by the CPU stops.
Figure 3.3.8 illustrates an example of the timing for clearance of the IDLE2
Mode Halt state by an interrupt.
Figure 3.3.8 Timing chart for IDLE2 Mode Halt state cleared by interrupt
b. IDLE1 Mode
In IDLE1 Mode, only the internal oscillator and the RTC and MLD continue to
operate. The system clock stops.
In the Halt state, the interrupt request is sampled asynchronously with the
system clock; however, clearance of the Halt state (i.e. restart of operation) is
synchronous with it.
Figure 3.3.9 illustrates th e timing for clearance of t he IDLE1 Mode Halt sta te by
an interrupt.
Figure 3.3.9 Timing chart for IDLE1 Mode Halt state cleared by interrupt
IDLE2
mode
Data
X1
A0~A23
D0~D31
RD
WR
Data
Interrupt fo
r
releasing Halt
IDLE1
mode
Data Data
X1
A0~A23
D0~D31
RD
WR
Interrupt fo
r
releasing Halt