TMP92CZ26A

92CZ26A-39

c. STOP Mode
When STOP Mode is selected, all internal circuits stop, including the internal
oscillator.
After STOP Mode has been cleared system clock output starts when the warm-up
time has elapsed, in orde r to allow oscillation to st abi lize.
Figure 3.3.10 illustrat es the timing for clearanc e of the STOP Mode Halt state by a n
interrupt.
Figure 3.3.10 Timing chart for STOP Mode Halt state cleared by interrupt
Table 3.3.5 Example of warming-up time af ter releasing STOP-mode
@fOSCH =10 MHz
SYSCR2<WUPTM1:0>
01 (28) 10 (214) 11 (216)
25.6 us 1.6384 ms 6.5536 ms
Interrupt fo
r
releasing Halt
Data Data
STOP
mode
Warm-up
time
X1
A0~A23
D0~D31
RD