TMP92CZ26A

92CZ26A-398

3.16.3.17 EOP Register
This register is used wh e n a dataphas e o f contr ol t ransf er typ e term inat e or when a
short packet is transmitti ng o f bulk -IN, interrupt-IN.
7 6 5 4 3 2 1 0
bit Symbol EP7_EOPB EP6_EOPB EP5_EOPB EP4_EOPB EP3_EOPB EP2_EOPB EP1_EOPB EP0_EOPB
Read/Write W W W W W W W W
After reset 1 1 1 1 1 1 1 1
Note: EOP<EP7_EOPB, EP6_EOPB, EP 5_EOPB, EP4_EOPB> registers are not used at TMP92CZ26A.
In a dataphase of control transfer type, write “0” to <EP0_EOPB> when all
transmission data is written to the FIFO, or read all receiving data from the FIFO.
UDC is terminated status stage by this signal.
When short packet is transmitted by using bulk-IN or interrupt-IN endpoint, use
this for terminate writing transmission data. In this case, write “0” to <EP0_EOPB> of
writing endpoin t . Write “1” to another bit.
EOP
(07CFH)