TMP92CZ26A

92CZ26A-528

2. LHSYNC Signal
The period of the horizontal synchronization signal LHSYNC corresponds to one line
of display. The LHSYNC period is defined as an integral multiple of the reference
clock signal LCP0.
The LHSYNC period is defined as the prod uct of the value set in LC DHSP<LH15:0 >
and the LCP0 clock period. The value to be set in LCDHSP<LH15:0 > should be
“segment size + number of dummy clocks” or larger for TFT. In the case of STN, the
minimum value of LCDHSP<LH15:0 > is:
Monochrome/grayscale : (Segment size / 8) + number of dummy clocks
Color : (Segment size × 3 / 8) + number of dummy clocks
LHSYNC [s: period] = LCP0 [s: period] × (<LH15:0> + 1)
LCD LHSYNC Pulse Register
7 6 5 4 3 2 1 0
bit Symbol LH7 LH6 LH5 LH4 LH3 LH2 LH1 LH0
Read/Write W
After reset 0 0 0 0 0 0 0 0
Function LHSYNC period (bits 7-0)
7 6 5 4 3 2 1 0
bit Symbol LH15 LH14 LH13 LH12 LH11 LH10 LH9 LH8
Read/Write W
After reset 0 0 0 0 0 0 0 0
Function LHSYNC period (bits 15-8)
The enable width of the LHSYNC signal can be specified by LCDHSW<HSW9:0>. It
is also possible to set the delay time for the LVSYNC signal in units of LCP0 pulses.
LHSYNC signal
(Phase control)
(
Enable width control
)
(Delay control)
(028BH)
LCDHSP
(
028AH
)