TMP92CZ26A

92CZ26A-582

(10) PAGE register (for PAGE0/1)

7 6 5 4 3 2 1 0

Bit symbol INTENA ADJUST ENATMR ENAALM PAGE PAGER
(1327H) Read/Write R/W W R/W R/W
After reset 0 Undefined Undefined Undefined
Read-modify
write
instruction
are
prohibited
Function (Note)
Interrupt
1: Enable
0: Disable
“0” is read.
1: Adjust
TIMER
1: Enable
0: Disable
ALARM
1: Enable
0: Disable
“0” is read.
PAGE
selection

Note: Pleas keep the setting order below and don’t set same time.
(Set difference time to Clock/Alarm setting and interrupt setting)
(Example) Clock setting/Alarm setting
ld (pager), 0ch : Clock, Alarm enable
ld (pager), 8ch : Interrupt enable

0 Select Page0
PAGE 1 Select Page1

0 Don’t care
ADJUST
1 Adjust sec. counter.
When set this bit to “1” the sec. counter become
to “0” when the value of sec. counter is 0 – 29.
And in case that value of sec. counter is 30-59,
min. counter is carried and become sec.
counter to "0". Output Adjust signal during 1
cycle of fSYS. After being adjusted once, Adjust
is released automatically.
(PAGE0 only)

(11) Reset register (for PAGE0/1)

7 6 5 4 3 2 1 0

Bit symbol DIS1Hz DIS16Hz RSTTMR RSTALM RE3 RE2 RE1 RE0 RESTR
(1328H) Read/Write W
After reset Undefined
Read-modify
write
instruction
are
prohibited
Function
0: 1 Hz 0: 16 Hz 1:Clock
reset 1: Alarm
reset Always write “0”

0 Unused
RSTALM 1 Reset alarm register

0 Unused
RSTTMR 1 Reset timer register

<DIS1HZ> <DIS1HZ> (PAGER)
<ENAALM> Source signal
1 1 1 Alarm
0 1 0 1Hz
1 0 0 16Hz
Others Output “0”